Asphalt Paving in Plainview, NY

Plainview is a large, densely developed hamlet in the Town of Oyster Bay, with thousands of single-family homes built primarily in the 1950s and 1960s during Long Island's post-war suburban expansion. The housing stock is predominantly ranches, split-levels, and capes on 60 to 80 foot lots with standard two-car driveways. These homes were built with asphalt driveways that used the base preparation standards of the era — typically 3 to 4 inches of unprocessed fill — which is far less than the 6 to 8 inches of processed aggregate we install today. After 60+ years, most original driveways have failed or been patched to the point where further repair is not cost-effective.

Plainview's soils are predominantly sandy glacial outwash — flat, well-draining, and easy to compact. This is actually an advantage for asphalt paving, as the subgrade provides stable support and does not trap water the way clay-heavy soils do. The flat terrain means drainage is entirely dependent on surface grading — there is no natural slope to help — so we engineer every Plainview driveway with a minimum 1/4 inch per foot crown or cross-slope.

The flat topography and grid-pattern streets also mean that Plainview driveways are relatively straightforward to pave — without the grades, curves, and tree corridors that complicate Gold Coast estate work. This translates to more competitive pricing. A standard Plainview driveway installation typically costs $4 to $6 per square foot, making asphalt one of the most affordable ways to restore curb appeal and eliminate the hazards of a deteriorated driveway.

Plainview's location along the LIE and between the commercial corridors of Route 135 and Old Country Road creates moderate street traffic that impacts driveway aprons. We build aprons with additional base depth and smooth grade transitions to handle the turning stress from daily commuter traffic.